You may then take the SD card out of your camera and UNLOCK the SD card. You will see through the lens of the camera. This will take you back to the main screen of the camera. Under that tab scroll down until you see “Default”. While the camera is still on setup mode, press the menu button. Do not turn the camera’s power off while the Switch the camera to the SETUP position, wait until the COVERT logo appears on the display screen(this completes the firmware update). Press the switch down and it will be locked.) (To lock your SD card, it is that small switch on the upper left side of the SD card. LOCK the SD card and insert it into the camera. ![]() **To receive firmware, please email with your serial number and camera model located on the inside stickers of your devices.**ĭownload the firmware update sent via support email. Once that’s done you will need to upload and download your settings under the SYS tab. Let it reach 100% and follow the remaining steps that will show on the camera display screen.ħ. Go down to FW update and press OK then YESĦ. Firmware Refresh for Network Enabled Devicesĥ.
0 Comments
Leave a Reply. |